DataTrace Thermal Barriers
If the process you want to monitor reaches temperatures above 140ºC (the upper operating limit of DataTrace Micropack III data loggers) you need to thermally protect the electronics and battery from damage. For these applications you can choose from 10 different DataTrace Thermal Packs, depending on your particular application. These thermal barriers are designed to insulate the logger body from the high temperatures, while allowing the temperature probe to extend out into the environment. All of the barriers work well in a dry environment and most will work in liquid environments, such as hot oil baths. In addition to high-temperature applications, the thermal barriers will protect the data logger battery in ultra-low temperature environments.
Several DataTrace Thermal Packs are available, depending on your particular needs.
Business Applications
- Extend the use of your DataTrace data loggers to high temperature processes, getting more from your capital investment.
- Eliminate the need for unstable and cumbersome thermocouple-based measurement systems, saving you time and money.
- Monitor additional manufacturing processes, optimizing your productivity.
Food Applications
- Baking Oven Monitoring
- Frying Oil Temperature
Pharmaceutical Applications
- Depyrogenation Ovens
- Ultra-low Temperature Freezers
Industrial Applications
- Textile and Carpet Processing
- Powder Painting Monitoring
Model 2150 - Thermal Barrier
For MPRF loggers, Model 2150 holds one MPRF logger.
|

|
Model 2150 - Specifications
| Size |
Cylinder, 50 mm D 152 mm L
|
| Loggers |
One MPRF Data Logger
|
| Insulation |
PTFE
|
| Use |
Dry Only
|
Typical Dry Performance
|
| Temperature |
Maximum Time |
|
250ºC/482ºF
|
27 minutes |
|
350ºC/662ºF
|
20 minutes |
|
400ºC/752ºF
|
17 minutes |
|
Model 3000 - Moderate Temperature
Designed for either dry or liquid environments, the Model 3000 is an economical choice to protect a single logger in moderate temperature environments.
|

|
Model 3000 - Specifications
| Size |
Cylinder, 75 mm D 120 mm L
|
| Loggers |
One MPIII
|
| Insulation |
PTFE
|
| Use |
Dry or Liquid
|
Typical Dry Performance
|
| Temperature |
Maximum Time |
|
250ºC/482ºF
|
59 minutes |
|
350ºC/662ºF
|
42 minutes |
|
400ºC/752ºF
|
38 minutes |
|
Model 3080 - Multi Logger
With the lowest cost per measurement channel, the Model 3080 is designed to protect three Micropack III data loggers in moderate temperature environments.
|

|
Model 3080 - Specifications
| Size |
Rectangular Box
95 mm X 82 mm X 46 mm
|
| Loggers |
Three MPIIIs
|
| Insulation |
PTFE, Carbon
|
| Use |
Dry Only
|
Typical Dry Performance
|
| Temperature |
Maximum Time |
|
250ºC/482ºF
|
36 minutes |
|
350ºC/662ºF
|
27 minutes |
|
400ºC/752ºF
|
24 minutes |
|
Models 3070/3071 - Single Logger
Single-logger versions of the 3080 with the same temperature performance characteristics. Model 3070 holds a single-probe logger. Model 3071 holds a dual-probe logger.
|

|
Models 3070/3071 - Specifications
| Size |
Rectangular Box
64 mm X 86 mm X 44 mm
|
| Loggers |
One MPIII
|
| Insulation |
PTFE, Carbon
|
| Use |
Dry Only
|
Typical Dry Performance
|
| Temperature |
Maximum Time |
|
250ºC/482ºF
|
36 minutes |
|
350ºC/662ºF
|
27 minutes |
|
400ºC/752ºF
|
24 minutes |
|
Models 3140, 3141, 3200 & 3400 – High Temperature
For the ultimate in protection, choose from three different 2-inch diameter vacuum dewar thermal barriers. The largest, Model 3400, will protect your loggers for several hours at temperatures above 350ºC.
|

|
Model 3140, 3141, 3200, 3400 - Specifications
| Model # |
Model 3140 |
Model 3141
|
Model 3200 |
Model 3400 |
| Size |
Cylinder, 50 mm D 140 mm L
|
Cylinder, 35 mm D 140 mm L |
Cylinder, 50 mm D 200 mm L
|
Cylinder, 50 mm D 400 mm L
|
| Loggers |
One MPIII
|
One MPIII |
One MPIII
|
One MPIII
|
| Insulation |
Vacuum Dewar, PTFE
|
Vacuum Dewar, PTFE |
Vacuum Dewar, PTFE
|
Vacuum Dewar, PTFE
|
| Use |
Dry or Liquid
|
Dry or Liquid |
Dry or Liquid
|
Dry or Liquid
|
| Temperature |
Maximum Time |
Maximum Time |
Maximum Time |
Maximum Time |
|
250ºC/482ºF
|
109 minutes
|
87 minutes |
195 minutes |
380 minutes |
|
350ºC/662ºF
|
77 minutes |
54 minutes |
135 minutes |
240 minutes |
|
400ºC/752ºF
|
68 minutes |
42 minutes |
120 minutes |
205 minutes |
|
Model 3175 – Slim Line
If space is at a premium, such as in depyrogenation ovens, the 1.2 inch diameter Model 3175 vacuum dewar is an excellent choice for the ultimate protection of your Micropack III data loggers.
|

|
Model 3175 - Specifications
| Size |
Cylinder, 30 mm D 175 mm L
|
| Loggers |
One MPIII
|
| Insulation |
Vacuum Dewar, PTFE
|
| Use |
Dry or Liquid
|
Typical Dry Performance
|
| Temperature |
Maximum Time |
|
250ºC/482ºF
|
93 minutes |
|
350ºC/662ºF
|
61 minutes |
|
400ºC/752ºF
|
53 minutes |
|
Related Information