Torqo II System Parts & Accessories

1506 - Beverage Bottle Clamp

• The Model 1506 Beverage Bottle Clamp is a quick acting bottle holding device that can be easily adjusted to accommodate from 10 oz. to 3 liter bottle sizes.

1624 - Quick Clamp Vise

• The Model 1624 Quick Clamp Vise is an easy to use bottle holding fixture that combines the flexibility of a lead screw pin vise with the rapid loading and unloading of an over-center type clamp. This vise is capable of holding round bottles from 5/8-inch diameter to 6 inch diameter and square bottles from 5/8-inch to 6 inch. Short and long pins are available. 

1606 - Compression Ring Chuck

• The model 1606 Compressed Ring Chuck is used for gripping primarily smooth sided caps. However this chuck may also be used on a finely serrated cap or an non-uniformly serrated cap. In the beverage industry this chuck is used on aluminum roll on caps (ROPP) as well as lug caps, while in the pharmaceutical industry this chuck can be used in conjunction with steel continuous thread type caps. 18 mm to 53 mm caps can be accommodated utilizing a compression ring chuck.

Closure Gripping Chucks

• An EDM style chuck is used for gripping serrated caps with serrations that are greater than .006 inches deep but less than .030 inches deep.

1626 - Slide Chuck (ROPP CLOSURES)

• The 1626 Slide Chuck can be used to torque test roll-on-pilfer proof (ROPP) caps which are commonly used to package product in the alcoholic beverage and wine industries. The unique jaw sets allow the chuck  to grip the rolled on serration patterns of the cap in order to perfom both destructive and non-destrucitve torque testing.

Petaloid Base Plates

• The petaloid plates are commonly used in the beverage industry in order to support the base of different sized products during torque testing. Mesa Labs offers numerous petaloid base designs which can accomodate a variety of different bottle shapes and sizes. The petaloid plates are used in conjunction with the 1506 Beverage Bottle Clamp.

1507 - Torqo Calibration Kit

• With a 1507 Calibration Kit, the accuracy of your Torqo can be verified or a complete on-site calibration can be performed by the user. Contained in this kit is a precision Calibration Disk, a ball bearing load support assembly and the necessary hardware to use this kit. The weights required for performing a calibration are not included in the kit but may be purchased from Mesa Laboratories, Inc.

Torqo Calibration Weights

• The weights required for performing a calibration are not included with the Torqo field calibration kit. The weights are sold as a separate itemdue to the fact that the size of the weights will vary depending on the torque capacity of the customer's Torqo system and in some cases the customer may already have the necessary weights on-hand.

Torqo Gold Bottle

• The Model 1612 Gold Bottle is used to verify the operational repeatability of the Model 1590 series Torqo. This bottle is constructed with high energy permanent magnets and is pre-set at the factory to a customer specified torque value of between 0 to 32 IN/LB, please contact us at torqo@mesalabs.com for additional information. Each Gold Bottle is labeled with its exact torque rating and repeats to an accuracy of +/- 0.2 inch pounds.

EPSON Serial Printer for Torqo Model 1590

• The following list of printed reports can be obtained from the Torqo: Header Information, Numerical Test Data, Summary Data, Graphical Data - X-Charts, R–Charts, Histograms Current Machine Configuration, List of Currently Used Machine Numbers, Configuration and Calibration Data

1605 - Child Resistant Closure Option

• The Model 1605 Child Resistant Closure Option enables the Torqo to be used for measuring the removal torque on the child resistant type cap that requires a down force in order to be opened. An air supply with the ability to provide a minimum of 60 PSI is required for this option. Both an air filter and an adjustable air regulator are contained in this kit and permanently mounted to the drive cover. The installation of this option on a Torqo does not affect in any way its use on conventional bottles and caps.

• Torqo II
• Product Brochures
• FAQ

• Contact Information
• More Info...